We offer customized solutions for domestic and commercial applications. The Sauna Rooms / Cabins can be locally fabricated or can be completely imported and fitted with Sauna Heaters from our principal Lagerholm Finnsauna, (Finland). With our technical capabilities with creative & innovative determination, we are in a position to cater to any customized requirements.

For different models of imported Sauna Rooms / Cabins & Sauna Heaters, please contact us.

Original Finnish Sauna Heaters

The Lagerholm Heaters are a good complement to the wide range of both in-and outdoor sauna cabins. The complete offer of the Lagerholm Sauna Heaters includes Heaters within the the electrical output of 2.3 to 33 kw . All Lagerholm Heaters are Original Finnish Sauna Heaters & FIMKO/CCA -approved.

When choosing the correct output following details should be taken into consideration :

• The walls and the ceiling of an electrically heated sauna should be well insulated.
• If the sauna has non-insulated surfaces like glass, brick walls etc., the room cubage must be increased by approximately 20%.
• The importance of ventilation should also be emphasized. With good ventilation the most enjoyable sauna experience is guaranteed.
• The standard electric connection is 230V 1N ~ / 400V 2N~ for Finnmini and for the other models 400V 3N~
• Other electric currents are available on separated request. In markets where single phases are normal, the Heaters are equipped accordingly.

Mounting Details

Many of the wall mounted Heaters models are delivered with an installation bracket, which facilitates the mounting of the Heater. Some Heaters with built-in control (Finnheat, Finnterio) can be installed left-or right handed, which facilitates the placing of the Heaters. Except for the big Heaters, the stoves are wall models. All stoves come with detailed instructions for installation and use.

The Heaters may only be connected to the electrical network in accordance with the current regulation by an authorised professional electrician.

Please note the marking of the different models. E always stands for stoves with separate control box. Marking without E indicates that the stoves sis delivered with built-in control.

Sauna Stones: Every Heater, electric or wood burning, is delivered with the required amount of sauna stones. The stone are tested thoroughly and contain no harmful substances.

Finnheat (Sauna Heaters) KIP 45-90 (E)

This model is available with both Built-in and separate Control Box. Delivered with heating capacity from 4,5 to 9 KW. The stone container is made of alu-zinc or of stainless steel (Additional cost) and the Heater top is delivered of stainless. The stone container carries appr. 20 kg stones, which gives an even and efficient heat.

Technical Details  (FIMKO/CCA-approved)

Heater dimensions: width 41 cm, depth 28 cm, height 60 cm. Heater type Power KW Recommended sauna room size min-max m 3 KIP45, KIP45 E 4.5 3 - 6 KIP60, KIP60 E 6 5 - 8 KIP80, KIP80 E 8 7 - 12 KIP90, KIP90 E 9 8 - 14 KIP 45 - 90 with Built-in Control Box KIP 45E- 90E with External Control Box EL-1

* The right for technical changes is reserved.